GCE ELECTRONICS - RFPLAYER 433/868MHz USB transceiver
RFPlayer connects wireless home automation devices already installed and works on the most commonly encountered protocols such as Somfy RTS, Deltadore X2D, Visonic, Chacon/Dio, ...
Security guarantees
Shipping Policy
RFPlayer, the first USB key making your home multilangual !
RFPlayer connects wireless home automation devices already installed and works on the most commonly encountered protocols: Somfy RTS, Deltadore X2D (Alarm, Heater, ...), Visonic (Alarm), Chacon/Dio (Home Automation), Scientific Oregon, ...
RFPlayer is bidirectional and transmits and receives simultaneously radio frequencies 433 MHz and 868 MHz.
RFPlayer connects via USB to the main home automation box and multiplies their abilities to interact with their environment.
RFPlayer has the most sophisticated mechanisms to maximize performance:
- OSD (One Stage Decoder)
- LBT (Listen Before Talk)
- High noise immunity by filters SAW (Surface Acoustic Wave)
RFPlayer brings also 3 embedded functions : Parrot, Repeater abd Transcoder.
Parrot
RFPlayer has other resources to handle protocols that are unknown to him. RFPlayer knows how to cooperate with the open source community through its interface compatible RFLINK.
RFPlayer saves the unknown frames radios and provides the software for analysis RFLINK box in the home automation. In addition, RFPlayer can transmit radio frames concocted by the RFLINK software.
If you teach him, PARROT will memorize with great precision the radio frequencies 433MHz and 868Mhz. PARROT just needs to listen, its understanding is phonetic.
Subsequently, it will be able to recognize in real time when they appear on the air, all useful information for home automation box and will transmit them back to the box Automation opportunely.
PARROT fits the unknown !
Repeater
Automation transmissions are subject to scope issue. This is due to phenomenon called "fading", that can occur even in a relative proximity between the transmitter and receiver signal, and in intrinsic signal attenuation with distance.
RFPlayer plugs into a 220V-USB power supply mode "stand-alone" will ensure repeater function, which will re-amplify the signal by significantly reducing the probability of fading.
The range is therefore greatly increased and radiofrequency exchanges with improved reliability.
Repetition is smart:
- The frames are recognized and reshaped,
- RFPlayer expect the best moment to retransmit the signal to prevent radio frequency collision.
Transcoder
The TRANSCODER function enables the repeater to convert on the fly frames of a protocol to another protocol output, including those stored by PARROT.
A single remote control with numerous channels can replace several remote controls from other manufacturers with fewer channels.
A locked Automation box (without USB port) may extend the scope of its protocols covered.
A new alarm, previously unreachable, can be take into account.
Everyone wins in connectivity !
FONCTIONS :
- RF 433MHz and 868Mhz emitter and receiver
- Support a wide range of sensors and actuators
- Support X10 and compatible devices (X'dom, ebode, ...)
- Support Chacon/DiO and compatible devices
- Support X2D Delta Dore standard
- Support Somfy RTS standard (roller shutters, shades, ...)
- Support Visonic PRO and compatible devices (433MHz and 868MHz frequencies)
- Support Oregon Scientific sensors (V1, V2.1 et V3)
- Support OWL energy monitors (CM130, CM119 et CM160)
- PARROT function for learning and re-transmitting radio frames
- Repeater function to increase the radio range of your devices
- Transcoder function to convert a received frame to another protocol
- Supported by many software and home automation gateways
CARACTERISTIQUES TECHNIQUES
- Power Supply : Via USB
- Frequency : 433Mhz & 868Mhz
- Type : Emitter / Receiver
- Connection : USB
Data sheet
- Type
- Interface
- Technology
- Chacon/DI-O
Delta Dore X2D
Edisio
OWL
Oregon Scientific
RF 433MHz
RF 868 - Connexion
- USB
- Compatibility
- Domoticz
Eedomus
Jeedom
You might also like