![SONOFF - Zigbee 3.0 door/window sensor SONOFF - Zigbee 3.0 door/window sensor](https://cdn1.domadoo.fr/15357-large_default/sonoff-zigbee-30-doorwindow-sensor-snzb-04.jpg)
![SONOFF - Zigbee 3.0 door/window sensor SONOFF - Zigbee 3.0 door/window sensor](https://cdn1.domadoo.fr/15357-large_default/sonoff-zigbee-30-doorwindow-sensor-snzb-04.jpg)
The SONOFF SNZB-04 door/window sensor can detect the opening and closing of a door or window and send a notification to your smartphone through the App.
Security guarantees
Shipping Policy
The SNZB-04 wireless door/window sensor is essential for knowing who is coming in and out of your home, so it is most often used as part of smart security system.
SONOFF SNZB-04 is a ZigBee two-in-one wireless door/window sensor that can be put on your door or window to tell you with an alert notification if your door or window is opened or closed, adding an extra layer of security to your home.
The sensor provides you the possibility to create a scene linkage of ZigBee devices. Both the opening and closing status of the door/window are synced on your mobile phone, no longer to think back whether the door/down is off or not.
It is really useful and can help you turn on or off the light in the action. Works with SONOFF ZigBee Bridge in harmony and any compatible Hub.
You can set a scene to get your hallway lighted immediately when the door is opened.
Its application can also extend to wide areas like drawers, garage doors, blinds, etc. Just stick it anywhere two things connect and it is always safe even if you don’t keep watch on it.
Share the sensor with your family to give them an ability to quickly control and monitor your home together.
Simple installation for easier setup. Peel and directly stick it on the targeted place or object, a smart security system is ready for you.
FEATURES
SPECIFICATION
Data sheet
To reset the Zigbee SonOff SNZB-04 door/window opening sensor, you must press and hold the reset button for more than 10 seconds.
1. Press the Reset button on the sensor for 5 seconds
2. The LED flashes 3 times to indicate that the sensor has been deleted from the Zigbee controller. Release the button.
3. You can then delete it manually on your Zigbee controller interface.
1. Put your Zigbee controller in pairing mode
2. Press the Reset button on the sensor for 5 seconds
3. The LED flashes 3 times to indicate that the sensor has entered pairing mode. Release the button.
4. Wait for the end of the pairing which will be indicated on the interface of your Zigbee controller
You might also like