![SONOFF - Zigbee 3.0 Motion Sensor SONOFF - Zigbee 3.0 Motion Sensor](https://cdn1.domadoo.fr/15057-large_default/sonoff-zigbee-30-motion-sensor-snzb-03.jpg)
![SONOFF - Zigbee 3.0 Motion Sensor SONOFF - Zigbee 3.0 Motion Sensor](https://cdn1.domadoo.fr/15057-large_default/sonoff-zigbee-30-motion-sensor-snzb-03.jpg)
The SONOFF SNZB-03 motion sensor informs you for each movement in your home.
Security guarantees
Shipping Policy
If your concern is not only about home security but about using motion to turn on or off the light, well, SONOFF SNZB-03 maybe makes you feel amazing.
This ZigBee motion sensor SNZB-03 is an extra-handy smart device for placing anywhere in your home to detect motion and trigger alarms. That means the sensor will send an instant alert notification to your mobile phone whenever the motion is detected if this security system is armed.
If you have a SONOFF ZigBee Bridge or any compatible Hub, you can connect the sensor to it for remote control of your home and create different scenes.
For example, you can set a scene for your living room light so that it automatically turns on when you walk across the room.
Boasts 110° view field and 6m detection rang and you can early receive an alert message of someone’s presence, accordingly taking measures to reduce the possibility that your house is threatened.
Easy and tool-free installation, 3M adhesive installation significantly saves your time.
Powered by the battery which is convenient to stick it on any place that you want to monitor.
FEATURES
SPECIFICATION
Data sheet
To reset the Zigbee SonOff SNZB-03 motion detector, you must press and hold the reset button for more than 10 seconds.
1. Press the Reset button on the detector for 5 seconds
2. The LED flashes 3 times to indicate that the detector has been deleted from the Zigbee controller. Release the button.
3. You can then delete it manually on your Zigbee controller interface.
1. Put your Zigbee controller in pairing mode
2. Press the Reset button on the detector for 5 seconds
3. The LED flashes 3 times to indicate that the detector has entered pairing mode. Release the button.
4. Wait for the end of the pairing which will be indicated on the interface of your Zigbee controller
You might also like