SUNRICHER - Zigbee 3.0 Heating thermostat

The SR-ZG9092A is a wireless thermostat for heating systems that complies with the Zigbee 3.0 wireless protocol standards. The thermostat has 4 operating modes that can be controlled manually and locally or remotely with a compatible Zigbee controller.

Its 16A relay will allow you to directly switch your heating system, for instance your electric heating or your floor heating. It can be controlled locally by setting up weekly programs or it can be associated with a compatible home automation box in order to be managed directly from the latter.

FEATURES :

• Zigbee thermostat
• Works with electrical heating
• Child lock protection
• Window open detection
• Internal over heat protection
• Energy consumption measurement
• 4 operation modes

TECHNICAL SPECIFICATIONS :

• Power Supply: 200-240VAC
• Max Load: 3680W @ 230V (resistive load)
• Max Current: 16A
• Power Consumption: <2W
• Ambient Temperature: 0°C to 40°C (during operation)
• Set Temperature Range: 0°C to 40°C
• Hysteresis: 0.5°C to 2°C (default 0.5°C)
• Floor sensor type: 
  
  • 1. NTC/10K B(25/50℃)=3950 (default)
  • 2. NTC/15K B(25/50℃)=3950
  • 3. NTC/50K B(25/50℃)=3950
  • 4. NTC/100K B(25/50℃)=3950
  • 5. NTC/12K B(25/50℃)=3950
• Control Mode: OFF, HEAT, ENERGY HEAT, AWAY, DRY
• Control Type: 
  • Control type means which temperature sensor the device refers to when it adjust temperature.
  • Room sensor: adjust temperature refers to room temperature (factory default type).
  • Floor sensor: adjust temperature refers to floor temperature. Room+Floor sensor: adjust temperature refers to both room temperature and floor temperature.
• Wiring Requirement: 
  • Current ≤ 13A - 1.5mm² wire
  • Current > 13A to 16A - 2.5mm² wire
• IP Rating: IP21
• Control Pollution Degree (Method D): pollution degree 2
• Rated Impulse Voltage (Method D): 4kV
• Relative Humidity: 8% to 80%
• Dimensions: 80x80x52mm