- Out-of-Stock
EVERSPRING - In-wall On/Off module Z-Wave Plus AN179
The In-Wall On/Off Module is a Z-Wave enabled device which is fully compatible with any Z-Wave enabled network.
The In-Wall On/Off Module is designed to control the on/off status of lighting and appliances load in your house.Two sets of dry contacts provide more wiring applications. For security, the unit can detect overheating and will automatically turn off relay to avoid damage. At 230V voltage, this module can support up to 11A resistive, 1200W incandescent, 700W motor, or 320W (40W*8) fluorescent load.
The In-Wall On/Off Module is a Z-Wave enabled device which is fully compatible with any Z-Wave enabled network.
Data sheet
- Type
- Micromodule
- Functions
- Actuator
- Technology
- Z-Wave Plus
- Compatible Fibaro HC2
- Oui
- Compatible Fibaro HC Lite
- Oui
- Compatible Vera Edge
- Oui
- Compatible JEEDOM
- Oui
- Compatible ZIPABOX
- Oui
- Compatible eedomus
- Oui
- Compatible Zibase
- Oui
- Compatible ZiBASE Pro
- Oui
- Compatible Vera
- Oui
- Compatible RFXCOM
- Non
- Compatible Myfox v1
- Non
- Compatible Myfox v2
- Non
- Power Supply
- Main power
Anonymous customer published the 28/09/2020 following an order made on 11/09/2020
Grande facilité d'inclusion, par rapport à d'autres produits. Fiabilité, sans problème depuis 4 ans, j'en ai recommandé d'autres pour compléter mon réseaux
Anonymous customer published the 17/04/2020 following an order made on 02/02/2020
Très bien, conforme à mes attentes, avec ses petites dimensions j'ai réussi à le mettre dans la boite d'encastrement sans problème.
Anonymous customer published the 02/03/2020 following an order made on 01/01/2020
Produit conforme. bon rapport qualité prix.
Anonymous customer published the 23/06/2019 following an order made on 28/05/2019
Répond aux attentes. Les produits z-wave sont chers et celui-ci l'est aussi, mais un petit peu moins que les autres.
Anonymous customer published the 21/06/2019 following an order made on 09/06/2019
Conforme
Anonymous customer published the 11/05/2019 following an order made on 26/04/2019
Ne fonctionne pas attente retour domadoo
Anonymous customer published the 15/03/2019 following an order made on 19/02/2019
Très bon rapport qualité prix
Anonymous customer published the 14/12/2018 following an order made on 11/11/2018
Switch Everspring demande 2 aller retour pour fonctionner avec un interrupteur classique.
Anonymous customer published the 14/12/2018 following an order made on 10/11/2018
Fonctionne bien avec la box tahoma
Des interférences radio surviennent. Quelqu'un utilise peut être le même signal radiofréquence à proximité. Attendez quelques temps et réessayez.
Vous pouvez également essayer d'exclure puis de ré-inclure le module.
Si le problème persiste, veuillez contacter votre revendeur.
Si le problème persiste, veuillez contacter votre revendeur.
1. L'appareil n'est pas correctement connecté à l'alimentation générale.
Vérifiez que la connexion est correcte, ou si l'alimentation a une tension trop élevée ou trop basse.
2. Dysfonctionnement de l'appareil
Contactez votre revendeur.
The reset procedure is as follows:
1. Press the button on the module three times within 1.5 seconds to put the module into include/exclude mode.
2. After a second, press and hold the button again until the LED turns off (about 5 seconds).
3. The module is reset to factory configuration and will go into automatic inclusion mode for 4 minutes.
You might also like