EUTONOMY - Adapter DIN for Fibaro Single Switch 2 FGS-213 with button
The euFIX S213 Adapter is used to install the Fibaro® Switch FGS-213 module on DIN TH35 type rail in the electrical switchboard.
Security guarantees
Shipping Policy
The euFIX S213 Adapter is used to install the Fibaro® Switch FGS-213 module on DIN TH35 type rail in the electrical switchboard.
The euFIX S213 Adapter consists of the case and the base board, where the FGS-213 module is mounted. The dimensions of the case are appropriate for a standard DIN TH35 type rail.
The base board contains a set of screw terminals, where all the wires (power supply, input and output signals, control push- buttons) can be safely connected.
The front panel of the case contains two diagnostics micro-push-buttons S1 & S2, which can be used to control the module, to register the module within the Z-Wave system or to remove it from the system without opening the adapter's case.
FEATURES :
- DIN adapter for Fibaro Switch FGS-213 with push-buttons
- Used to install the Switch FGS-213 module on DIN TH35/TS35 type rail in the electrical switchboard
- Free location on the label to locate the controlled line
- Micro-push-buttons S1 & S2 used for control, inclusion or exclusion of the module within the Z-Wave system
TECHNICAL SPECIFICATIONS :
- Supply voltage: 230 V AC +/-10%, 50–60Hz
- Load power: max 8A
- Dimensions: 34.8 x 87.3 x 64.7 mm
- Width in TE units: 2 TE modules
- Conductor wires cross section: max. 2.5 mm2
- Maximum length of wires connected to Sx, S1, S2 inputs: 20m
- Operating temperature: 0 °C to +50 °C
- Relative humidity: ≤90 %, no condensation
- Directives:
- LVD 2014/35/EC
- RoHS 2011/65/EU
- Vos modules Fibaro installés au tableau électrique grâce aux adaptateurs euFIX
Les modules Fibaro sont prévus pour être installés derrière des interrupteurs ou dans des boîtes de dérivation. Cependant dans certaines situations il peut être plus pratique de les mettre dans le...
You might also like