Zigbee 3.0 TIC Module for Linky Meter + External A-Antenna - LIXEE ZLINKY TIC

Description of the Tic Linky Zigbee module

ZLinky_TIC is a device for transmitting all information from the Linky meter in ZigBee 3.0.

Attention, the external antenna option involves making a hole in the Linky box cover.

Attention, the module is not compatible with ISKRA Linkys with a USB port because there are only 2 pins for telemetering.

You can find all additional information on the github.

 Contracts fully compatible with the Linky transmitter:

• Base
• Peak/off-peak hours
• EJP
• TEMPO 

For any other contract, unless otherwise specified, this product will not work properly.

Attention: Module not compatible with ISKRA brand Linky meters with a USB port.

Installation of the Tic Linky Zigbee module

Follow the following instructions:

• Remove the green cover from the Linky.
• Insert the ZLinky_TIC by pressing the button above.

Using the Tic Linky box with Jeedom

With Jeedom, there are different plugins compatible with this Lixee Linky home automation module:

• JeeZigbee plugin (official)
• Zigbee plugin
• Zigbeelinker plugin
• Abeille plugin

Using the Tic Linky box with Home Assistant

With Home Assistant, there are 3 communication methods with this linky tic zigbee module:

• ZHA
• Zigbee2MQTT
• Deconz

Functions of the Tic module for Linky meter:

• Zlinky_TIC is powered by the terminals of the Linky meter.
• It is compatible and complies with ZigBee 3.0 protocol.
• It currently handles historical and standard mode with BASE / HCHP / Tempo subscription in single or three-phase or Production.
• The external antenna is useful for Linkys outdoors with the possibility of taking the antenna out of the trunk.
• Commands available on Zigbee2MQTT:
  • Measurement_poll_interval: This device does not support reporting electric measurements, so it is polled instead. The default poll interval is 60 seconds, set to -1 to disable. The value must be a number with a minimum value of -1.
  • Linky_mode: Counter with TIC in standard or historical mode. May require restart (default: auto). The value must be one of auto, historical, standard.
  • Energy_phase: Single or three-phase power. May require restart (default: auto). The value must be one of auto, single_phase, three_phase.
  • Production: If you produce energy back to the grid (works ONLY when linky_mode: standard, default: auto). The value must be one of auto, true, false.
  • Tarif: Overrides the automatic current tarif. This option will exclude unnecessary attributes. Open a issue to support more of them. Default: auto. The value must be one of Historique - BASE, Historique - HCHP, Historique - EJP, Historique - BBR, Standard - Sem WE Lundi, Standard - Sem WE Mercredi, Standard - Sem WE Vendredi, Standard - BASE, Standard - Heure Pleine Heure Creuse, Standard - Heures Super Creuses, Standard - TEMPO, Standard - ZEN Flex, auto.
  • kWh_precision: Number of digits after decimal point for kWh, takes into effect on next report of device. This option can only decrease the precision, not increase it. The value must be a number with a minimum value of 0 and a maximum value of 3.
  • Measurement_poll_chunk: During the poll, request multiple exposes to the Zlinky at once for reducing Zigbee network overload. Too much request at once could exceed device limit. Requires Z2M restart. Default: 1. The value must be a number with a minimum value of 1.
  • Tic_command_whitelist: List of TIC commands to be exposed (separated by comma). Reconfigure device after change. Default: all. The value must be textual.

Technical features of the ZLINKY_TIC:

• Compatibilities:
  • Jeedom
  • Home Assistant
  • Zigbee2MQTT
  • Domoticz
  • Eedomus
  • Zigate
• Communication: ZigBee® 2.4Ghz
• Weight: 15g
• Dimensions: 63 x 24 x 16 mm
• Package Dimensions: 110 x 110 x 20mm
• Operating Temperature: 0°C - 60°C