SUNRICHER - Zigbee 3.0 recessed 4-in-1 multifunction sensor

This Zigbee sensor is a battery powered low power consumption 4 in 1 device that combines PIR motion sensor, temperature sensor, humidity sensor, and illuminance sensor. The PIR motion sensor trigger and sensitivity can be configured.

The sensor supports low battery power alarm, if the power is lower than 5%, the motion sensor trigger and report will be forbidden, and the alarm will be reported every one hour until the battery power is higher than 5%. The sensor is suitable for smart home applications which need sensor based automation.

Features of Zigbee 4 In 1 Multi Sensor Sunricher SR-ZG9032A-4IN1

• Zigbee 3.0 compliant
• PIR motion sensor, long detection range
• Temperature sensing, automates your home heating or cooling
• Humidity sensing, automates your home humidifying or dehumidifying
• Illuminance measuring, daylight harvesting
• Autonomous sensor-based control
• OTA firmware upgrade
• Wall mount installation
• Can be use for indoor applications

Technical Specifications of Zigbee 4 In 1 Multi Sensor Sunricher SR-ZG9032A-4IN1

• Operate Voltage: 3VDC (2*AAA Batteries)
• Standby Consumption: 10uA
• Radio Frequency: 2.4 GHz
• Wireless Protocol: Zigbee 3.0
• Wireless Range: 30m (Line of Sight)
• Motion Sensor Type: PIR sensor
• PIR sensor Detection Range: Max. 7 meters
• Recommended Installation Height: Wall mount, 2.4 meters
• Temperature Range and Precision: -40°C~+125°C, ±0.1°C
• Humidity Range and Precision: 0 – 100% RH (non-condensing), ±3%
• Illuminance Measuring Range: 0~10000 lux
• Operating Temperature Range: 0℃ to 40℃ (indoor use only)
• Operating Humidity: 0℃ to 40℃ (indoor use only)
• Waterproof Rating: IP20
• Dimensions: 55.5 x 55.5 x 23.7mm
• Material / Color: ABS / White