SHELLY QUBINO - Z-Wave DIN rail relay switch with power metering Shelly Wave Pro 1

Wave Pro 1PM is a one-phase, 1-channel relay supporting up to 16 A. Equipped with an integrated power meter, Wave Pro 1PM allows you to measure the power consumption of all automated lights or heavier appliances. Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs. ​

Shelly Qubino works on Z-Wave

By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world. ​

Works with any Z-Wave gateway

Wave Pro 1PM is retrofit and designed to fit behind switches/push-buttons. Once installed, include the device in your Z-Wave network (Z-Wave gateway is required) and control it using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways. 

1 channel, 16 A​​

Wave Pro 1PM has a total device output of 16 A. ​

Power monitoring​​

Wave Pro 1PM provides precise monitoring of the power consumption. ​

Wide range of voltage support​​

Use it to control a wide range of AC devices and appliances. ​

Associations ​​

Establish direct communication between devices in your Z-Wave local network and set actions with no hub present! ​

The highest level of security​

Include the device as Security 2 Authenticated for encrypted communication and utmost safety of your Z-Wave network.

FEATURES of Shelly Wave Pro 1

• ​1 output, 16 A​
• Power metering​
• DIN-rail mountable​
• Extremely low power consumption: < 0.3 W​
• Z-Wave frequency band: 868.4 MHz (CEPT countries)​
• Latest technology: Z-Wave 800 Series​
• Automatic set-up with SmartStart ​
• Security 2 Authenticated for the highest level of security​
• Over-the-air firmware updates​
• Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices​

TECHNICAL SPECIFICATIONS of Shelly Wave Pro 1

• Power supply: 110-240 V AC, 50/60 Hz
• Power consumption: < 0,3 W
• Power measurement: Yes
• Max. switching voltage AC: 240 V
• Max. switching current AC: 16 A
• Overheating protection: Yes
• Overload protection: Yes
• Overvoltage protection: Yes
• Distance: Up to 40 m indoors (depends on local condition)
• Z-Wave repeater: Yes
• CPU: Z-Wave S800
• Z-Wave frequency bands: 868,4 MHz
• Maximum radio frequency power transmitted in frequency bend(s): < 25 mW
• Size (H x W x D): 94x19x69 ±0.5 mm
• Weight:61 g
• Mounting: DIN rail
• Screw terminals max. torque: 0.4 Nm
• Conductor cross section: 0.5 to 2.5 mm / 20 to 14 AWG (green connector) 0.5 to 1.5 mm / 20 to 16 AWG (white connectors)
• Conductor stripped length: 6 to 7 mm (green connector) 5 to 6 mm (white connectors)
• Shell material: Plastic
• Color: Red
• Ambient temperature: -20°C to 40°C 
• Humidity: 30 % to 70 % RH