TRIO2SYS - Indoor EnOcean Temperature  Sensor White with assistance
search
  • TRIO2SYS - Indoor EnOcean Temperature  Sensor White with assistance

TRIO2SYS - Indoor EnOcean Temperature Sensor White with assistance



T2S10020103
€64.99 Tax included

This Trio2Sys sensor is designed to measure the ambient temperature and transmit it wirelessly to a suitable receiver. Version with battery assistance.


2 Products available
Quantity

 

Security guarantees

 

Shipping Policy

EnOcean Temperature Sensor

This Trio2Sys sensor is designed to measure ambient temperature and transmit it wirelessly to a compatible receiver. The sensor is powered by a solar cell, making it maintenance-free and self-sustaining.

Temperature is measured every 100 seconds. If the temperature variation between two measurements exceeds +/-0.5°C, a message is sent. In the absence of sufficient temperature variation, information is transmitted approximately every 15 minutes. Its high measurement accuracy ensures user comfort.

At full charge, its autonomy allows it to remain active for up to 4 days even in complete darkness. This temperature sensor is delivered on a base that facilitates its integration within your home automation system. Although installed, by separating it (using a small screwdriver) from its support, the sensor can then learn a compatible receiver nearby.

The assistance integrated into sensor 10020103 allows it to function even in areas where the brightness is too low to recharge it via the solar panel. When the sensor's energy reservoir is insufficient to operate it, the assistance takes over until the solar sensor is sufficiently illuminated again.

FEATURES:

  • Wireless and battery-free temperature sensor
  • EnOcean Technology
  • Solar recharge
  • 4-day autonomy in darkness
  • Status report every 15 minutes
  • Can be installed anywhere
  • Easy installation and use
  • Lithium battery backup assistance

TECHNICAL SPECIFICATIONS:

  • Transmission frequency: 868.3MHz
  • Transmission power: 10mW max
  • Measurement range: from 0°C to +40°C
  • Measurement accuracy: +/-0.5°C
  • Measurement resolution: 0.16°C
  • Storage temperature: -20°C to +60°C
  • Lighting: >100 lux on average per day
  • Certifications: CE and R&TTE directive 1999/5/CE
  • Protection degree: IP 30
  • Range in buildings:
    • Masonry: 20m, through a maximum of 3 walls
    • Reinforced concrete: 10m, through a maximum of 1 wall/ceiling
    • Plasterboard/Wood: 30m, through a maximum of 5 walls

T2S10020103
2 Items

Data sheet

Type
Sensor
Functions
Temperature
Technology
EnOcean
Power Supply
Battery
Solar cell
Compatibility
Eedomus
Jeedom