SCHNEIDER ELECTRIC - Wiser Energy PowerTag wireless sensor 3-phase

The PowerTag is a current measurement sensor to be installed in the electrical panel. It is dedicated to devices with a rating of less than or equal to 63A. It must be paired with the Wiser gateway to ensure monitoring and diagnostics of circuits up to the load level.

It is specifically designed for energy management, load monitoring, and power availability applications. It integrates accurate real-time measurements of active energy produced and consumed.

In the event of a power outage, it sends a voltage loss alarm and the current value per phase before being shut down. It is installed on the phase (red) cable of the circuit you wish to monitor.

It communicates wirelessly to the Wiser gateway (Zigbee). It can be mounted on top or below the protective device.

Functions of the Wiser Connected Current Measurement Sensor

• Energy sensor providing accurate real-time measurements and energy values
• Wireless communication, must be paired with a hub to process collected data
• Precise energy sensor with class 1 accuracy according to IEC 61557-12 standard
• Compact and cost-effective, mounted on top or below protective devices up to 63A
• Load monitoring
• Circuit monitoring
• Overload alarm
• Energy production monitoring (photovoltaic)
• Energy management

Technical Specifications of the Zigbee Connected Current Measurement Sensor R9M70

• Product Name: PowerTag R9 F63
• Supply Voltage: 200...240 V AC, +/- 20 %
• Max Current: 63 A
• Base Current: 10 A
• Starting Current: 40 mA
• Measurement Type:
• Active Energy
• Current
• Voltage
• Mounting Location: Top or bottom
• Mounting Support: On circuit breaker
• Transmission Support: Radiofrequency 2.4…2.4835 GHz compliant with IEEE 802.15.4
• Maximum Transmission Power: 10 mW
• Installation Mode: Screw (terminals)
• Cable Size:
• 1.5…16 mm² 1 solid cable
• 1.5…2.5 mm² 2 stranded cable
• 1.5…2.5 mm² 2 solid cable
• 1.5…16 mm² 1 stranded cable
• Cable Length: 0.25 m