TRIO2SYS - DIN Rail receiver 1-channel EnOcean 16A
T2S10020118
€79.99
Tax included
The Trio2Sys DIN rail 1-channel 16A receiver is used to receive radio signals from switch transmitters or EnOcean sensors.
Security guarantees
Shipping Policy
DIN rail receiver 1 channel EnOcean 16A
The DIN rail 1-channel 16A receiver is used to receive radio signals from switch transmitters or EnOcean sensors.
Designed for switching heavy loads, it can switch resistive loads, incandescent lamps, halogen, fluorescent tubes, ELV halogen lamps with ferromagnetic and electronic transformer, power contactor or small motor.
The 1-channel 16A modular receiver is equipped with the “repeater” function as well as the Remote Commissioning function (allowing remote configuration of the receiver).
FEATURES :
- 1 channel 16A receiver module
- EnOcean technology
- Control lights / devices remotely
- ON / OFF function
- Support any type of load
- Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window or door contacts)
- Zero Crossing Technology
- Repeater and status feedback functions
- Remote commissioning
- DIN rail mounting
- Easy to install and use
TECHNICAL SPECIFICATIONS :
- Power supply: 230V ~ / 50 Hz
- Power consumption: 3W
- Output load:
- Resistive load: 16A / 3500VA max (Cos φ = 1)
- Inductive: 800W with cosφ = 0.4 to 0.6
- Halogen / Incandescent: 2300W
- Fluorescent: 1000W
- EnOcean Equipment Profile: D2-01-01
- Dimensions: 17.5mm x 97.4mm x 66.4mm (1 DIN rail slot)
- Operating temperature: -10 to + 45 ° C
- Humidity: 0% to 75% relative humidity (non-condensing)
- Transmission frequency: 868.3MHz
- Range in buildings:
- Masonry: 20m, through 3 walls maximum
- Reinforced concrete: 10m, through 1 wall / ceiling maximum
- Plasterboard / Wood: 30m, through 5 walls maximum
T2S10020118
Data sheet
- Type
- Din Rail Module
- Functions
- Actuator
- Technology
- EnOcean
- Power Supply
- Main power
You might also like