HEATIT CONTROLS - Z-Water Regulator for water based heating system
search
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system
  • HEATIT CONTROLS - Z-Water Regulator for water based heating system

HEATIT CONTROLS - Z-Water Regulator for water based heating system

HEATIT_4512475
€312.00
Tax included

Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating.

Quantity

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

 

 

Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating. The module clips right onto a DIN-rail to add a variety of functions to your wireless Z-Wave network. Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog inputs. The module is power supplied from a 230V AC mains connection and is able to deliver an output supply of 24V DC or 230V.

Heatit Z-Water relay outputs may be freely controlled from the Z-Wave network, and may be used for several purposes, e.g. on/ off control of lights, controlling valve actuators in an underfloor heating system, or controlling other home automation systems.

Heatit Z-Water inputs are analog inputs for interfacing simple temperature sensors; NTC, PT1000, etc.

It is possible to configure the level and the indication of the status indicator LED in the front of the Heatit Z-Water regulator.

FEATURES :

  • Regulator for water based heating systems
  • Relay outputs can control actuators in a water based floor heating system
  • May be used to control both 24V actuators and 230V actuators
  • Inputs may be configured to serve many purposes
  • May be used with a Heatit Z-Temp sensor in each zone
  • DIN-rail mounting
  • Works as a Z-Wave repeater to improve the Z-Wave network range
  • Firmware updates (OTA)
  • Supports encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL SPECIFICATIONS :

  • Protocol: Z-Wave Plus, 868,4MHz
  • Chip: Z-Wave 500 chip
  • Rated voltage: 100V - 240V 50/60Hz
  • Power consumption: 0.6W standby
  • Ambient temperature: 0°C to 40°C
  • Humidity: Max. 90% RH
  • Fuse: 3.15A Quick-Acting, UMF 250 Schurter Inc., part no.: 3405.0171.11
  • 24VDC output: Maximum 1.17A, 28W
  • Max. switching current: 5A
  • Max load per relay: 150W
  • Max voltage: 250V AC, 30V DC
  • Inputs:
    • Max. input voltage: 10V DC
    • Input impedance: 10 KΩ
    • Loop output voltage: 5V DC
  • Dimensions: 160 x 86 x 58mm
HEATIT_4512475
3 Items

Data sheet

Type
Din Rail Module
Functions
Actuator
Dry Contact
Heating
Technology
Z-Wave Plus
Power Supply
Main power
Compatibility
Eedomus
Fibaro HC3
Fibaro HC3 Lite
Homey
Jeedom
Z-Wave specificity
Security S2