LIXEE - TIC module to Zigbee 3.0 for LINKY meter + External Antenna

Description of the Tic Linky Zigbee module

ZLinky_TIC is a device for transmitting all Linky meter information in ZigBee 3.0.

Please note that the external antenna option requires a hole to be drilled in the Linky box cover.

Please note that the module is not compatible with ISKRA Linkys with a USB port, as there are only 2 pins for remote information.

You can find more information on the github.

Contracts fully compatible with the Linky transmitter:

• Base
• Peak/off-peak EJP
• TEMPO

For all other contracts, except in exceptional cases, this product will not work properly.

Caution: Module not compatible with ISKRA Linky meters with USB port.

Installation of the Tic Linky Zigbee module

Follow the instructions below:

• Remove the Linky's green cover.
• Insert the ZLinky_TIC by pressing the button on top.

Using the Tic Linky box with Jeedom

With Jeedom, there are various plugins compatible with this Linky Lixee home automation module:

• JeeZigbee plugin (official)
• Zigbee plugin
• zigbeelinker plugin
• Bee plugin

Using the Tic Linky box with Home Assistant

With Home Assistant, there are 3 ways of communicating with this linky tic zigbee module:

• ZHA Zigbee2MQTT
• Deconz

Video explaining how to use the Linky Tic LIXEE module:

Functions of the Tic module for Linky meters:

• Zlinky_TIC is powered by the Linky meter terminals.
• It is compatible with and complies with the ZigBee 3.0 protocol.
• It currently manages the historical and standard mode with BASE / HCHP / Tempo subscription in Single or Three-phase or Production.
• The external antenna is useful for outdoor Linky devices, with the possibility of taking the antenna out of the trunk.
• Commands available on Zigbee2MQTT:
  • Measurement_poll_interval: This device does not support notification of electrical measurements, so it is polled instead
  .
• • Default polling interval is 60 seconds, set to -1 to disable.
  • Value must be a number with a minimum value of -1.
  • Linky_mode: Meter with TIC in standard or historical mode.
  • May require restart (default: auto).
  • Value must be one of the following: auto, historical, standard.
  • Energy_phase: Single-phase or three-phase power.
  • May require restart (default: auto).
  • Value must be one of the following: auto, single_phase, three_phase.
  • Production: If you are producing energy for the grid (works ONLY when linky_mode: standard, default: auto).
  • The value must be one of the following: auto, true, false.
  • Tariff: Overrides the current automatic tariff. This option will exclude unnecessary attributes. Open a problem to support more of them. Default: auto. Value must be one of the following:
  • History - BASE, History - HCHP, History - EJP, History - BBR, Standard - Sem WE Monday, Standard - Sem WE Wednesday, Standard - Sem WE Friday, Standard - BASE, Standard - Heure Pleine Heure Creuse, Standard - Heures Super Creuses, Standard - TEMPO, Standard - ZEN Flex, auto. kWh_precision
  • : Number of digits after the decimal point for kWh, takes effect at the next device report.
  • This option can only lower precision, not increase it.
  • The value must be a number with a minimum value of 0 and a maximum value of 3.
  • Measurement_poll_chunk: During polling, request several Zlinky exposures at a time to reduce Zigbee network overload. Too many requests at once could exceed the device limit. Requires Z2M reboot.
  • Default: 1. Value must be a number with a minimum value of 1. Tic_command_whitelist
  • : List of TIC commands to be exposed (separated by a comma). Reconfigure device after change. Default: all. Value must be textual.

ZLINKY_TIC technical features :

• Compatibility:
  • Jeedom
  • Home Assistant
  Zigbee2MQTT
• • Domoticz
  Eedomus
• Zigate
• Communication: ZigBee® 2.4Ghz
• Weight: 15g
• Dimensions: 63 x 24 x 16 mm
• Package Dimensions: 110 x 110 x 20mm
• Operating Temperature: 0°C - 60°C