REFURBISH - FIBARO - Roller Shutter 3 FGR-223 Z-Wave+

FEATURES :

• Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2
• Authenticated with PRNG-based encryption,
• To be installed with roller blind motors with electronic or mechanical limit switches,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle and dedicated roller blind switches,
• To be installed in wall switch boxes.

TECHNICAL SPECIFICATIONS :

• Power Source: 100-240V~50/60Hz,
• Rated load current:
  • 4.2A for lamps and resistive loads
  • 1.7A for motors with compensated power factor (inductive loads)
• Supported motor type: single-phase AC motors,
• Required limit switches: electronic and mechanic,
• Power consumption: up to 0.8W
• Operating temperature: 0°C - 35°C,
• Active element: micro-gap relay switch μ,
• For installation in boxes: Ø = 50mm, depth ≥ 60mm,
• Radio protocol: Z-Wave (500 series chip),
• Radio signal power: up to 5dBm,
• Radio frequency band: 868.4 MHz
• Range: up to 50m outdoors, up to 40m indoors (depending on the terrain and building structure),
• Outside dimensions (L x W x H) 42.5mm x 38.25mm x 20.3mm
• Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU