TRIO2SYS - EnOcean wall switch for roller shutter compatible CELIANE

EnOcean simple switch, design LEGRAND CELIANE

The switch transmitter is wireless and battery-free. It is completely autonomous and sends a radio signal thanks to the energy released when the ON and OFF buttons of the transmitter switch are pressed. It requires no maintenance.

It eliminates tedious cabling back and forth. It can be placed at any point in the room and can be changed at will. Its adapted bottom allows it to be fixed to a wall either by screws or by gluing it with double-sided tape.

Combined with a receiver, it allows remote control of various electrical equipment.

It is possible to turn on an electrical device from one switch and turn it off with another. Up to 30 transmitters per receiver, the possibilities are almost endless without tearing apart walls and partitions, same for applications: schools, hotels, hospitals, historic buildings, offices, etc.

The trim is interchangeable because it is compatible with the LEGRAND CELIANE range.

ATTENTION: Product supplied without finishing plate. You will find in the "Accessory" tab the white finishing cover.

FEATURES :

• Wireless and battery-free
• No maintenance
• Roller shutter marking
• Control one or more EnOcean receivers
• Add a command point
• Can be installed anywhere
• Compatible with the entire LEGRAND CELIANE finish range

TECHNICAL SPECIFICATIONS :

• Transmit frequency: 868.3 MHz
• Protocol: EnOcean
• EnOcean Equipment Profile (EEP): F6-02-01
• Dimensions: 8.52 x 8.52 x 1.76cm
• Colours: White ABS
• Operating temperature: -25 up to +45°C
• Supported humidity range: 0% to 75% (non-condensing)