DOMADOO - Zigbee 3.0 IO module - 4 dry contact inputs + 2 NO/NC outputs (ON/OFF or pulse)

Establishing reliable communication between wired devices and Zigbee networks​

The digital IO Module integrates wired devices into wireless Zigbee networks. Providing four inputs and two outputs, the IO Module works as a bridge of reliable communication between wired devices and a control system over Zigbee networks. Devices connected to the input will trigger events, and devices connected to the output will respond to events.

Alert button for emergencies

Bringing your wired devices online With the Zigbee digital IO Module, you can connect wired devices to a network, allowing your devices to communicate and receive information wirelessly. The IO Module can be connected to a wide range of devices. For instance, the IO Module can be connected to a heat pump and activate it when other appliances in the building do not require as much electricity. This reduces the strain on the electrical grid. Connected to an access system, the IO Module enables wireless control of automatic doors through a gateway. The IO Module is also interoperable with other Zigbee devices which, for instance, allows you to connect window blinds to a Motion Sensor Mini, so the blinds close when the sensor detects bright light. The IO Module could also be connected to an electrical system that lifts up a door or window so that they open slightly when high humidity levels are detected by a Humidity Sensor or Air Quality Sensor. Additionally, each input can also be configured as an IAS alarm to bridge wired alarm systems and sensors into the Zigbee network. The small size of the module allows you to improve the mobility and scalability of your wired devices, as it can be fitted into a wide variety of places according to your needs. The digital IO Module is the optimal tool for keeping all your devices connected.

FUNCTIONS :

• General
  • Dimensions: 45 x 45 x 16 mm / 1,77 x 1,77 x 0,63 inches
  • Weight: 24.8 g / 0.87 oz (with packaging: 41.5 g / 1.46 oz)
  • Color: White
  • Power supply: 6-28VDC (Alternative: uUSB – e.g. for power bank)
  • Power consumption: 0.3 W
• Radio features
  • Sensitivity: -100 dBm
  • Output Power: 12 dBm
• Environment
  • Operation temperature: 0 to + 50 °C / 32 - 122 °F
  • Relative humidity: 5 - 95% (non-condensing)
  • IP-class: IP20
• Specifications for output
  • 2 pcs NO/NC - on/off pulse
  • Max switch voltage: 30V
  • Max switch current: 1A
• Specifications for input
  • 4 pcs contact input (potential free switch or relay) NO/NC by SW
  • Each input can be configured as an IAS alarm
• Communication/Wireless protocol
  • Zigbee Home Automation
  • Zigbee router
• Certifications
  • Conforming to CE, FCC, IC, ISED, RED, RoHS, and REACH directives
  • Zigbee 3.0 certified