

The FRIENT intelligent smoke detector alerts you remotely and in real time in the event of a fire in your home.
Security guarantees
Shipping Policy
Imagine always having a frient who tells you when something’s wrong at your house. Someone warning you instantly when smoke is detected. Beep… Beep… Beeeeeep. A frient with a great volume – and who is a LOUD fella. Someone who also warns you when you’re far from home where even the loudest of smoke alarms will have to give up.
The Zigbee-based smoke alarm helps protect your home from fire, no matter where you are. It warns you with a loud sound when it detects smoke or fire, and it has the additional feature of alerting you remotely through notifications. That way, you can call the fire department or get a neighbor to check on your house if you’re not at home. Perfect if you travel a lot, have a second home, or simply want to feel more secure. The Intelligent Smoke Alarm is battery-powered and easy to install.
The Intelligent Smoke Alarm connects to other friently smoke alarms. This means that they all go off if one does. So you won’t overhear it if an alarm goes off in one room while you’re at the other end of the house. Not every hero wears a cape.
FUNCTIONS :
TECHNICAL CHARACTERISTICS :
Data sheet
Cédric A. published the 23/09/2023 following an order made on 09/05/2023
Les produits Frient sont toujours de bonnes qualité (danois), même s'ils sont un peu plus chers que leurs équivalents chinois
Jovann L. published the 23/09/2023 following an order made on 14/05/2023
Très bon produit compatible signée / home Assistant
Renato G. published the 01/02/2023 following an order made on 24/01/2023
Confort les descriptions
Louis M. published the 08/09/2022 following an order made on 27/08/2022
Dégomme les oreilles comme prévu, fonctionne bien avec Zigbee2MQTT et GladysAssistant ! La taille est très petite, bien plus que ceux vendus dans le commerce, non connectés.
Vincent P. published the 26/07/2022 following an order made on 05/07/2022
Marche très bien et content: 4 détecteurs identiques dans la maison au fur et à mesure que les anciens (non connectés) furent défectueux et jetés
Christophe V. published the 05/07/2022 following an order made on 28/06/2022
très bien mais je ne trouve pas la commande pour connaitre le niveau des piles.
Eric D. published the 28/06/2022 following an order made on 22/06/2022
Quelques difficultés d'inclusion mais tout à l'air ok maintenant
Anonymous customer published the 17/04/2022 following an order made on 02/04/2022
J'ai des Fibaro FGSD-002 en Z-Wave et celui-ci en Zigbee est un petit peu plus haut mais le style est tout aussi sympathique que les Fibaro, et en plus contrairement au FGSD-002 il est possible de contrôler la sirène, top pour une alarme ou pour les faire sonner en synchro si vous en avez plusieurs. Tester sur Jeedom avec le plugin Zigbee et une clé Conbee2
Gael F. published the 22/02/2022 following an order made on 16/01/2022
look sympa et petite taille.
A reset is necessary if you want to connect your Smart Smoke Detector to another gateway or if you need to perform a factory reset to eliminate abnormal behavior.
RESET STEPS
1. Remove the detector from its mounting base by turning it counterclockwise.
2. Press and hold the LED button.
3. While you hold down the button, the LED will first flash once, then twice, and finally several times in succession.
4. Release the button while the LED flashes several times in succession.
5. After releasing the button, the LED shows a long flash and the reset is complete.
Always test the operation of the Smart Smoke Detector after installation or battery change.
Test all your alarms once a week to make sure they are working properly.
1. Remove the insulation tape from the battery.
2. The smart smoke detector will now start its search (up to 15 minutes) for a Zigbee network to join.
3. Make sure the Zigbee network is open to pair devices and accept the smart smoke detector.
4. While the smart smoke detector is searching for a Zigbee network to join, the LED button will flash red.
5. When the LED button stops flashing, the smart smoke detector has successfully joined the Zigbee network.