AQARA - Single Switch Module T1 without neutral - SSM-U02
The SSM-U02 Aqara Single Switch Module is a Zigbee 3.0 relay used to control lamps or devices. No need neutral cable.
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
SSM-U02 Aqara Single Switch Module T1 (No Neutral) is a relay control module based on Zigbee 3.0 wireless communication protocol. This product is mainly used to control the power on/off of lights or fans.
It works with a compatible home automation hub (Aqara Hub, Homey, etc.) to perform functions such as remote control via an application and time control. Combined with other smart accessories, it offers you an interesting smart experience.
Automate traditional lights with ease
The Single Switch can easily turn traditional lights into smart devices. It will invisibly integrate into your existing wiring to make your home smart. Many smart scenes can be made when it works with other smart devices Aqara.
Remote Control with Your Phone
Did you forget to turn off the fan? Just take out your phone and open the app Aqara Home. You can then easily turn off all the lights in your home.
With overheat and overload protection, you can be sure your home is safe and secure.
- Control your lighting or electrical appliances
- Compact size
- Fits almost any wall box just behind your existing wall switch
- 2-way switch support
- No need for neutral cable
- App remote control
- Smart home automation
- Schedule to switch on or off
- Overload & overheating protection
TECHNICAL SPECIFICATIONS :
- Power supply : 100 - 250VAC, 50 / 60Hz
- Maximum load : 5A (1250W)
- Operating humidity : 0-95% RH
- Ambient temperature : 0°C to 35°C
- Communication : ZigBee 3.0
- Effective communication distance : 30m (indoors)
- Dimensions : 42.9 × 40 × 21.4 mm
- Weight : 40 g
- Power Supply
- Main power
- Amazon Echo
Lidl / Tuya / Smart Life
- Zigbee Version
- Zigbee 3.0
Thierry V. published the 03/04/2023 following an order made on 25/03/2023
Bon produit parfait avec Jeedom. Seul reproche il n'indique pas la consommation.
Phong Huynh P. published the 06/12/2022 following an order made on 28/11/2022
Un peu trop grande pour la boîte encastré standard
Jérémie P. published the 28/07/2022 following an order made on 19/07/2022
Bon rapport qualité-prix même si ce n'est pas le moins chère mais il est plus petit que ses concurrents donc plus facile a rentrer dans un pot d'encastrement.
Christophe V. published the 25/07/2022 following an order made on 17/07/2022
Bon rapport qualité prix
Thomas C. published the 18/02/2022 following an order made on 14/01/2022
Module peut-être un peu gros mais qui fonctionne très bien derrière un interrupteur classique pour rendre connectée n'importe quelle ampoule.
Anonymous customer published the 01/08/2021 following an order made on 30/06/2021
Un peu capricieux pour l'enregistrement sur Deconz II, mais parfaitement fonctionnel ensuite.
Anonymous customer published the 26/06/2021 following an order made on 07/06/2021
Correspond à la description et aux attentes
Anonymous customer published the 05/06/2021 following an order made on 23/05/2021
Fait sa fonction d'interrupteur commandé et surtout sans neutre (rare sur le marché...) J'ai un aléa sur des bandes LED qui s'éteignent, mais avec une fuite de courant qui fait qu'elles sont légérement allumées. A voir d'où ça vient... Sinon se couple bien et fonctionne bien. (mieux avec le POPP que le Zigate d'ailleurs)
Anonymous customer published the 14/05/2021 following an order made on 30/04/2021
Rien à signaler
Anonymous customer published the 11/04/2021 following an order made on 30/03/2021
Fonctionne très bien avec une clé ConBee2 mais est assez difficile à insérer dans les boites d'encastrement EU. Le produit est très bien car évite le remplacement des interrupteurs
First of all, by using the Single Switch Module T1 (No Neutral) in combination with a wireless switch, it is very easy to realize dual control / multiple control. The wireless switch can be placed in most positions in your home to coordinately control the Single Switch Module T1 (No Neutral);
If a traditional dual control switch has been installed, the Single Switch Module T1 (No Neutral) can be placed in the controlled device or in the junction box near the device. The original switch connects from the line end of the load wire to the S0 wiring terminal, S1 is not connected, the L1/L wiring terminal is connected normally, and the control double switch d origin can be maintained to achieve dual control.
There is no minimum load requirement, but the maximum load should not exceed 1250 W (resistive load).
The effective distance between the two devices is 7 to 10 meters with a wall between them, which may depend on the material and thickness of the wall, and the ambient conditions. If there are more walls between the two devices, we recommend that you shorten the distance.
The Single Switch Module T1 (No Neutral) must connect to a compatible hub to achieve functions such as interaction and remote control. Once the wiring is complete, open the app, click Add Subdevice, select the corresponding Single Switch Module T1 from the options and follow the instructions.
There are three ways to integrate the module into the network:
1. When the Single Switch Module T1 is not connected to a network, it automatically enters the pairing stage after it is powered on, and it needs to maintain the state for 30 seconds;
2. You can press the button of the Single Switch Module T1 for 8 seconds to enter the pairing stage, and it needs to hold the state for 30 seconds;
3. It can be turned on and off 5 times via an external switch to enter the pairing phase, and it needs to maintain the state for 30 seconds.
When the module is installed, it is recommended to stick the antenna on the side wall of the plastic flush-mounting box and to keep it parallel to the wall; if the switch bracket is made of plastic, it is recommended that the antenna be no more than 10 mm from the wall; if the switch bracket is metal, it is recommended that the antenna be more than 15mm from the wall (metal bracket); moreover, the antenna should be as far as possible from the module and the power cable (the recommended distance is more than 15 mm).
If it is installed in a metal box, it is recommended to install the antenna on the plastic switch, but it requires sufficient space on it.
If it is installed on the ceiling or inside the light, the antenna should avoid being stuck on the metal, and also should avoid too much shielding.
It can be connected with a rocker switch (bistable) or a push switch (monostable). Once connected to the external switch, you need to configure it on the app. The default connection is the toggle switch.
1. It can be considered to run the wires through the flush-mounting box and to cut the excessively long wires to an appropriate length to obtain more space.
2. It can be considered to place it on the ceiling, but it must remain as far as possible from the bright and heating parts of the light.
3. It can be envisaged to increase the depth of the recessed box by a deeper box.
If wired incorrectly, the Single Switch Module T1 may burn out or not work. Please strictly follow the wiring instructions or ask a professional electrician to install it!
There are 5 wiring terminals on the back, which are L, L1, S0, S1 and N. Among them, the phase wire connects to L; the lighting connects on to L1.
There are three connection methods for S0 and S1:
1. Connect them to both ends of the external switch respectively;
2. Connect S0 to one end of the external switch; S1 is inactive. The other end is connected to the phase;
3. If there is no external switch, you don't need to connect it.
The first two connection methods allow control of the module by the external switch.
Both are control modules with relay output and have the same main functions, but the first must be connected to neutral and phase. While the latter only needs to be connected to the phase to provide power. You should choose one according to your home wiring.
It can be installed in a wall recessed box or on the ceiling to control the lights; it can also be installed in the recessed box of the wall socket to transform it into a smart wall socket; or it can be installed to control fan, electric water heater and other powerful electric appliance with enough internal space and suitable qualified structure and electric performance.
You might also like