SUNRICHER - Zigbee 3.0 3in1 wireless remote control
SR-ZG2858A is a Dim CCT RGB 3 in 1 Zigbee key remote controller that enables switch, dimming, color temperature control, RGB color control of Zigbee lighting devices.
SR-ZG2858A is a Dim CCT RGB 3 in 1 Zigbee key remote controller that enables switch, dimming, color temperature control, RGB color control of Zigbee lighting devices. It works with a Zigbee gateway/coordinator, it shall be added to a Zigbee network and bind compatible Zigbee lighting devices from Zigbee controller or hub interface so that it can control the devices.
This Zigbee remote supports 3 groups for binding max. 30 lighting devices and enables to control single color, tunable white, RGBW and RGB+CCT Zigbee lighting devices. It is a low cost Zigbee remote powered by two AAA batteries due to robust, reliable ZigBee 3.0 networking.
The Zigbee remote can be compatible with universal Zigbee gateway/coordinator and lighting devices thanks to interoperability of products with the same Zigbee Wireless standard.
The Zigbee remote supports Touchlink commissioning to bind directly to a lighting device without a Zigbee hub or Touchlink after the remote and device are both added to the Zigbee hub network.
- ZigBee RGB+CCT+DIM remote based on ZigBee 3.0
- High sensitive & high stable touch color wheel, fast & precise color control
- Battery powered remote with low power consumption
- Enables to pair ZigBee lighting devices through touchlink commissioning
- Supports find and bind mode to pair with ZigBee lighting devices
- Supports 3 groups for binding max. 30 lighting devices
- With 6 preset scenes, enables to save and recall 5 scenes2.4 GHz global operation
- Transmission range up to 30m
- Compatible with universal ZigBee Gateway products
- Enables to bind and control universal DIM, CCT, RGB, RGBW and RGB+CCT zigbee lighting devices
TECHNICAL SPECIFICATIONS :
- Power Supply : 2x AAA battery 3 VDC
- Radio Frequency : 2.4GHz
- Range : up to 30 m
- Dimming range : 0.1%-100%
- Dimensions : 140 x 44 x 17 mm
- Waterproof Grade : IP20
- Remote control
- Power Supply
- Amazon Echo
Lidl / Tuya / Smart Life
- Zigbee specificity
- Zigbee Version
- Zigbee 3.0
After pairing the remote to the Philips Hue bridge, do the following:
1. Turn off the power to the bulb/lamp.
2. Keep the remote control within 10cm of the lamp.
3. Turn the lamp back on.
4. Press and hold the button of the group to which you want to add the lamp.
5. The Led indicator flashes 3 seconds quickly, then 6 times quickly to indicate pairing is successful.
You might also like