SUNRICHER - 4 butons wall mounted Z-Wave+ dimmer controller
Single Color Wall Mounted Push Button Z-wave Secondary Controller Dimmer Switch SR-ZV9001K4-DIM
The SR-ZV9001K4-DIM is a new single color wall mounted push button Z-Wave secondary controller dimmer switch which adopts latest z-wave RF Plus and Mesh network technology to switch and dim single color LED lighting. It is a universal z-wave slave and can be added to z-wave network or removed from z-wave network by z-wave primary (master) controllers or gateway.
The dimmer switch is powered by a cell lithium battery. The wireless dimmer is compatible with single color z wave receiver SR-ZV9101FA-DIM and different frequencies are available for different countries or areas. The signal transmit distance can be up to 30m.
It supports 2 groups for associations, a lifeline group association to primary (master) controller and 1 group association to devices, the group association to devices supports maximum 5 Z-wave devices per group. Compatible with existing frames from Berker, Gira, Jung and Merten, the z-wave secondary controller is easy to be mounted on the wall.
FEATURES :
- Z-wave slave controller
- Source-routed Mesh Network Architecture
- Each device works as a node
- All Nodes Are Transceivers
- Each Z-wave Network Allows Up to 232 Devices
- Actively route around and circumvent obstacles or radio dead spots
- Wireless Synchronization to Drastically Increase Control Distance
- Devices can communicate to one another by using intermediate nodes
- Added to z-wave network by z-wave masters or gateway
- Removed from z-wave network by z-wave masters or gateway
- Compatible with universal z-wave masters/gateway
- Supports 1 lifeline group association to master controller
- Supports 1 group association to z-wave devices, maximum 5 devices per group
TECHNICAL SPECIFICATIONS :
- Power Supply : 3VDC (1xCR2450 battery)
- Z-Wave Frequency : 868.42MHz
- Range : up to 100 m outdoor, 20 m inside building
- Dimensions : 71.2x71.2x13.6mm
- Waterproof Grade : IP20
- Installation : 3M glue or screws
Data sheet
- Type
- Wall switch
- Functions
- Emitter
- Technology
- Z-Wave Plus
- Power Supply
- Battery
- Compatibility
- Fibaro HC3
Fibaro HC3 Lite
Jeedom
You might also like