AEOTEC - Door/Window Sensor 7
The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°.
The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable. Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor.
Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.
With the potential free input the Aeotec Door/Window Sensor 7 can also include other sensors in your Z-Wave system. For that the binary sensor is connected to the potential free input of the sensor. Besides sensors there can also be connected momentary switches, which controls scenes in your gateway.
FEATURES :
- Detection of open, closed or tilted thanks to patented sensor technology
- Built in tamper protection
- Potential free binary input to connect external sensors
- Up to 3 years battery lifetime
- Tilt angle at least 5°
- Z-Wave Smart Start and S2 Security
- Wireless technology: Z-Wave Plus
TECHNICAL SPECIFICATIONS :
- Power supply : Battery 1/2 AA
- Battery life: 3 years assuming 5 open and 5 close events per day with Wakeup reports disabled
- Radio Frequency : 868.42 MHz
- Operating distance : Up to 50 meters outdoors
- Tilt Detection: must be over 5 degrees
- Operating humidity : 10 to 95%
- Operating temperature : -20°C to 45°C
- Dimensions :
- Sensor : 19 x 71 x 18 mm
- Magnet : 8 x 20 x 11 mm
Data sheet
- Type
- Sensor
- Functions
- Dry Contact
Open / Close
Tilt - Technology
- Z-Wave Plus
- Power Supply
- Battery
- Compatibility
- Eedomus
Fibaro HC3
Fibaro HC3 Lite
Jeedom - Z-Wave specificity
- Security S2
SmartStart
Anonymous customer published the 09/05/2021 following an order made on 27/04/2021
Fonctionne parfaitement sous Jeedom. Attention inclusion sécurisée S0 non disponible (voir test Domadoo)
Anonymous customer published the 27/04/2021 following an order made on 11/04/2021
Bien mais aiment très fragile !
Anonymous customer published the 19/09/2020 following an order made on 07/08/2020
Je voulais un produit pour domotiser ma boite à lettres et éventuellement pouvoir mettre des contacts reed (différentiation lettre et colis) finalement avec un peu de bricolage, j'ai réussi à faire les deux, ça marche très bien, et le capteur qui est enfermé dans la boite aux lettres transmet le signal sans aucun problème: la boite est insérée dans un mur sur la rue, le mur est à 5 metres de la maison , la box domotique (Eedomus) est dans la cave à 15 métres de la boite aux lettres avec de nombreux murs, j'en suis étonné, en conclusion: super produit
Anonymous customer published the 09/07/2020 following an order made on 02/06/2020
Produit conforme a la description
Anonymous customer published the 18/01/2020 following an order made on 16/12/2019
Correspondant parfaitement aux attentes
Anonymous customer published the 23/11/2019 following an order made on 03/11/2019
Efficace, simple bien reconnu par ma Homey. J'en suis à mon ciquième en service et continuerai probablement à étendre ma protection avec.