Out-of-Stock

FIBARO - Blind/Roller Shutter FGR-222 Z-Wave

Name: FIBARO - Blind/Roller Shutter FGR-222 Z-Wave
Brand: Fibaro
SKU: FGR-222

REF: FGR-222

The FIBARO Roller Shutter 2 allows you to control electric roller blinds, awnings, venetian blinds, garage doors and gates.

This product is no longer available for sale

The FIBARO Roller Shutter 2 allows you to control electric roller blinds, awnings, venetian blinds, garage doors and gates. Roller Shutter can control any device that is powered by an AC electric motor.

FIBARO system integrated with shutters or blinds will allow you to save on the heating or air conditioning. On a clear winter day the sun will help to heat your home, but in the summer, closed blinds will prevent house from overheating.

You overslept again and did not have enough time to drink your morning coffee? With FIBARO you can easily design your perfect “wake up” scene. In the morning system raises the temperature in your room and opens the blinds. Coffee machine is switched on automatically when the motion is detected on the way to the bathroom. How will you make your morning brighter?

FEATURES :

Controlled by FIBARO System devices or any Z-Wave controller
Allows to monitor the motor's energy consumption
Controls of the blinds position or the angle of a venetian blind
Executive elements: relays
The device may be operated by momentary or toggle switches and by dedicated roller blind control switches
Possibility to activate scenes by physical switch

TECHNICAL DATAS :

Wireless technology: Z-Wave
Voltage: 110 - 240V, 50Hz
Wiring: Requires neutral
Maximum load: 1,000W - 4.3A (230V AC)
Power Consumption: < 0.8W
Range: up to 50m (outdoors) and 30m (indoors)
Dimensions (LxWxH): 42 x 37 x 17mm

Reference FGR-222

Data sheet

Type: Micromodule
Functions: Roller Shutter
Technology: Z-Wave
Compatible Fibaro HC2: Oui
Compatible Fibaro HC Lite: Oui
Compatible Vera Edge: Oui
Compatible JEEDOM: Oui
Compatible ZIPABOX: Oui
Compatible eedomus: Oui
Compatible Zibase: Oui
Compatible ZiBASE Pro: Oui
Compatible Vera: Oui
Compatible RFXCOM: Non
Compatible Myfox v1: Non
Compatible Myfox v2: Non
Power Supply: Main power

Download

Manuel Utilisateur FGR-222 FR

Download (2.67MB)

View the trust certificate

Reviews subject to control

For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our Transparency Charter.
No inducements have been provided for these reviews
Reviews are published and kept for a period of five years
Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
The reasons for deletion of reviews are available here.

4.5 /5

Based on 92 customer reviews

1
1
2
0
3
7
4
24
5
60

Sort reviews by :

Anonymous customer published the 18/03/2019 following an order made on 04/11/2018

4/5

Parfait, juste un peu imposant pour certaines boites d'encastrement.

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 05/12/2018 following an order made on 04/11/2018

5/5

parfait

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 05/12/2018 following an order made on 28/10/2018

4/5

tres bien

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 31/10/2018 following an order made on 04/10/2018

5/5

Très bon produit

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 24/09/2018 following an order made on 03/09/2018

5/5

Fonctionne parfaitement bien

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 21/09/2018 following an order made on 31/08/2018

5/5

Très bien

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 21/08/2018 following an order made on 26/07/2018

5/5

Sert au pilotage d’un store de terrasse, marche du premier coup. Du bon matos !

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 28/07/2018 following an order made on 02/05/2018

5/5

Parfait

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 28/07/2018 following an order made on 28/06/2018

5/5

Paramétrage rapide sur Jeedom et fonctionnement parfait.

Did you find this helpful? Yes 0 No 0

Anonymous customer published the 21/07/2018 following an order made on 30/06/2018

5/5

Correspond a ce que j'attendais

Did you find this helpful? Yes 0 No 0

How to calibrate the FGR-222 module ?

Calibration is a process in which a roller shutter discovers the position of the limit switches and the characteristics of the motor. Calibration is mandatory so that the roller shutter can correctly recognize the position of the blind. The procedure consists of a total automatic movement between the limit switches (up, down and up). There are separate procedures for calibrating the positioning of blinds and slats (venetian blinds). Each time the calibration requires the completion of a complete cycle (from top to bottom).

Calibration via the Z-Wave network

1. Make sure the module is powered

2. Add the device to the Z-Wave network

3. Set Parameter 29 to 1

4. The device will go through the calibration process, completing the full cycle - up, down and up again

5. The value of parameter 29 will automatically be set to 0

6. Test if the positioning works correctly

Calibration using switch keys

1. Make sure the module is powered and the switch is connected to terminals S1 and S2.

2. Add the device to the Z-Wave network

3. Press and hold the button connected to input terminal S1 or S2, then release it at least 3 seconds later

4. Press the same button again and release it after 3 seconds

5. Now press and hold the same button, for 3 seconds, for the 3rd time

6. After pressing and releasing the button for the third time, the automatic calibration sequence begins

7. The device will go through the calibration process, completing the full cycle - up, down and up again

8. Test if the positioning works correctly

Calibration via the menu (button B)

1. Make sure the module is powered

2. Add the device to the Z-Wave network

3. Press and hold button B

4. Wait for the visual indicator to turn yellow (4th position of the MENU)

5. Release button B

6. Short press button B again

7. The device will go through the calibration process, completing the full cycle - up, down and up again

8. Test if the positioning works correctly

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

Reset Roller Shutter 2

The reset procedure erases the module's EPROM memory, including all data information regarding the Z-Wave network controller, calibration, and power consumption.

1. Make sure the device is powered

2. Press and hold button B

3. Wait for the visual indicator to turn yellow (4th position of the MENU)

4. Release button B

5. Press button B again, briefly

6. After a few seconds, the device will reboot with auto-include mode enabled

7.To exit auto-inclusion mode, press the B key. Resetting the Micromodule for roller shutters will not cause it to be erased from the memory of the Z-Wave network controller. To add the device to the Z-Wave network again, you will need to exclude it first.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

Menu Modes

The FIBARO Roller Shutter Micromodule has a comprehensive menu. Each menu level is indicated by a different LED color. To enter the menu, press and hold button B for at least 2 seconds. When button B is held, the color of the LED will change in the following sequence:

BLUE – Calibration procedure

PURPLE – Z-Wave network range test

GREEN – Reset power consumption data memory

YELLOW – Reset Micromodule for roller shuttersRelease button B to select the desired function and confirm your choice with another short press on button B.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

The led of the FIBARO Roller Shutter Micromodule flashes red once the device has reached its end of travel during the calibration process

Set the value of parameter No. 18.

Check the power consumption when the blind is moving and use a slightly higher value.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

The FIBARO Roller Shutter Micromodule does not display the energy consumption.

1. The Z-Wave controller does not track power consumption.

To track energy consumption in the GUI of the Z-Wave controller, it must have this feature. Please contact support for your Z-Wave controller.

2. The power consumption tracking function is not enabled in the Z-Wave controller.

To track power consumption in the Z-Wave controller GUI, this feature must be enabled. Please contact support for your Z-Wave controller.

3. The shutter is disabled.

Please check the condition of your shutter.

4. Advanced Parameters No. 40, 42 or 43 have been modified.

Please check the setting of these parameters or restore the default values.

5. The FIBARO Roller Shutter Micromodule is out of range of the Z-Wave controller.

The FIBARO Roller Shutter Micromodule must be within direct range of the Z-Wave controller or within range of another node on the Z-Wave mesh network.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

The FIBARO Roller Shutter Micromodule does not update its status in the interface when the position of the switch changes.

Check the 3rd association group setting. Make sure it's not empty.

Add your primary Z-Wave controller to this group (try removing it and adding it again).

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

The FIBARO Roller Shutter Micromodule has stopped communicating with my Z-Wave controller.

1. The FIBARO Roller Shutter Micromodule has been reset.

After resetting, the FIBARO Roller Shutter Micromodule returns to its default settings. To use it, you must again make the inclusion to your Z-Wave controller.

2. Power is off.

The FIBARO Roller Shutter Micromodule must be powered by 110-230V AC. Please check your power supply using a voltage tester or multimeter.

3. The FIBARO Roller Shutter Micromodule is out of range of the Z-Wave controller.

The FIBARO Roller Shutter Micromodule must be within direct range of the Z-Wave controller or within range of another node on the Z-Wave mesh network.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

The FIBARO Roller Shutter Micromodule has stopped working.

1. The FIBARO Roller Shutter Micromodule is not powered.

The FIBARO Roller Shutter Micromodule must be powered by 110-230V AC. Please check your power supply using a voltage tester or multimeter.

2. The FIBARO Roller Shutter Micromodule has been reset.

After resetting, the FIBARO Roller Shutter Micromodule returns to its default settings. To use it, you must again make the inclusion to your Z-Wave controller.

3. The FIBARO Roller Shutter Micromodule is out of range of the Z-Wave controller.

The FIBARO Roller Shutter Micromodule must be within direct range of the Z-Wave controller or within range of another node on the Z-Wave mesh network.

4. The FIBARO Roller Shutter Micromodule is broken.

Please contact your dealer to initiate the warranty procedure.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

I cannot manage to include my FIBARO Roller Shutter Micromodule in my Z-Wave controller.

1. The FIBARO Roller Shutter Micromodule is already included in another Z-Wave controller.

The FIBARO Roller Shutter Micromodule must be deleted using the Z-Wave controller or must be reset.

2. The FIBARO Roller Shutter Micromodule is too far from the Z-Wave controller.

The FIBARO Roller Shutter Micromodule must be within direct range of the Z-Wave controller during the inclusion process.

3. The FIBARO Roller Shutter Micromodule is not powered.

The FIBARO Roller Shutter Micromodule must be powered by 110-230V AC. Please check your power supply using a voltage tester or multimeter.

4. The FIBARO Roller Shutter Micromodule has a different frequency (EU, US, or ANZ) than your Z-Wave controller.

The FIBARO Roller Shutter Micromodule must operate on the same Z-Wave frequency (EU, US, or ANZ) as your Z-Wave controller. Please contact your dealer to exchange it.

5. The FIBARO Roller Shutter Micromodule is broken.

Please contact your dealer to initiate the warranty procedure.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

I have connected the Micromodule for roller shutters to the motor of the blind, but it only moves partially and stops.

You probably have blinds equipped with an electronic stopper, please modify parameter 10 and enter the value 1.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

Can I control blinds fitted with electronic stops?

You can control these types of shades, but you won't be able to position them. To control this type of blinds, please modify parameter 10 and enter the value 1.

Does this answer your question?

Yes (0)

No (0)

Sorry about that

How can we improve it?

Thanks

Your feedback helps improve this answer for everyone.

Can I control and position blinds equipped with mechanical stops?

Yes – this type of blind is fully compatible with our Micromodule for roller shutter.

Does this answer your question?

Yes (0)

No (0)