- On sale!
ECODIM - Smart LED rotary dimmer Z-Wave 200W ECO-DIM.07 Pro
Rotary smart dimmer with Z-Wave receiver that works with Homey, Fibaro Home Center 2/3 and else.
Unique and the very first in the world: The Z-Wave LED dimmer with push / rotary knob! The LED dimmer works with a normal 2-wire connection and can be operated with the usual flick of the wrist and via home automation.
So have you paired a hub / controller such as FIBARO, HOMEY etc. with Google Home / Assistant or Amazon Alexa? Then you can control this LED dimmer by voice, via the app and with a flick of the wrist.
In addition, this digital smart LED dimmer has a consumption meter, wide range (0-200W LED), excellent dimmability and light stability (MIN and MAX adjustment) and all A-brands cover material fit on the built-in element.
Suitable for> 90% of all (normal) dimmable LED lamps. Of course you can also use it if you don't have an app or home automation system at home yet. The dimmer comes with a clear manual. In short, a very complete and unique product and a world first!
With this smart Z-Wave LED dimmer you can make your 'dumb' lamps smart. You do not need to connect smart LED lamps to this LED dimmer, but simply normal / dumb LED lamps (working on phase cut / trailing edge).
- Z-Wave rotary dimmer
- Push / Turn
- Suitable for all Z-Wave home automation
- Consumption meter
- 0-200W LED
- Suitable for most common brands cover plates: Berker by Hager, Busch-Jaeger, Gira, JUNG, Kopp, Merten by Schneider 51xx and System M, Niko, PEHA
- Optimal dimmability & light stability
- MIN and MAX adjustment
- Protection against overload & interference signals
- Suitable for 90% of all dimmable LED lamps
- Installation with existing 2 wires (no neutral wire or bypass required)
- Suitable for wireless changeover / hotel switching with wireless switch
- Silent dimming
- Soft-start system
- Suitable for surface-mounted boxes & flush-mounted boxes with or without screw holes
- Supplied with cover frame and dimmer button (only use electronics is also possible)
TECHNICAL SPECIFICATIONS :
- Protocol: Z-Wave
- Voltage: 230V 50/60Hz
- Power (load):
- LED: 0-200W
- Halogen light bulbs: 10-300W
- Dimmer type: RC Phase cut
- Operation: Push and turn button
- Inside: 70,6 x 70,6 x 33mm
- Outside (including cover plate): 84x84mm
- Weight: 49,98g
- Wall switch
- Z-Wave Plus
- Power Supply
- Main power
- Fibaro HC3
Fibaro HC3 Lite
- Z-Wave specificity
- Security S2
8 other products in the same category:
REFURBISHED - SCHNEIDER ELECTRIC - DCL lighting actuator for Ø80mm wall box