IMPORTANT! To avoid malfunctions, it is imperative to:
Remove the PH sensor cap.
Tighten the protective caps with the wrench provided (do not tighten by hand, as water may penetrate the product).
With the YAGO Tuya Zigbee water quality monitor, you can monitor your pool's water quality in real time with a range of different measurements: chlorine (pH), TDS (ppm), EC (conductivity), CL (chlorine), ORP, SEL and pool water temperature with greater precision, speed and stability.
This sensor must be associated with a compatible Zigbee home automation hub (Tuya, Jeedom or Home Assistant with Zigbee2Mqtt) to be used.
The product is calibrated by default. However, if after 48 hours of use in real-life conditions (in your pool), the values are inconsistent, calibration is necessary and you will need to purchase a Tuya home automation box, such as a NOUS E1 box.
Please note:
The water in the pool must be between 6.5 and 8ph and ORP between 487-840mv, and the chlorine value will be displayed normally.
Chlorine will not be displayed if either of these values is out of range.
If the PH value is below 6.5, this means that the water quality is too acidic and contains impurities, and it is necessary to add disinfectant water for disinfection
.
If the ORP value is above 850mv, this means that too much disinfectant has been added, and it is necessary to add water or change the water for neutralization.
If the ORP value is below 487mv, this means that too little disinfectant has been added, and the pool needs to be disinfected again
.
FUNCTIONS :
pH and salt tester for saltwater pool: the professional water quality tester makes it much easier for you to confirm the pH and salinity level (ppm) in the current pool when you start using the salt chlorinator generator; also work for weekly salt control, to ensure proper chlorinator operation, balance salt, chlorine and pH.
Good help for the saltwater pool.
Free pH and chlorine tester: recommends a pH of 7.2 to 7.8 pH and a free chlorine concentration of 1 to 3mg/L in pools; the pH and chlorine monitor can test both free chlorine and pH, knowing that both levels are in the optimal range for clear pool.
Once the pH and salinity tester is connected to your smartphone, open the Tuya app and view real-time pool data anytime, anywhere (the app is free).
The highest or lowest measurement value can be set according to demand in the smart scene, the result of the detection is out of range can be requested on the app, allowing you to disinfect the pool at the best time.The device must be used with a gateway
Multifunctional pool monitor 7 in 1: monitor pH, ORP, salinity, chlorine, EC, TDS, temperature value
.
Range: pH(0.0-14.0pH), salinity (0-9990ppm), ORP(-999 ~ + 999mV), CL(0.0-4.0mg/L), EC(0-9990μS/cm, 10.01-19.99 mS/cm, TDS(0-9990ppm), Temperature (32.0-122.0 ℉); Professional pH ORP CL salt tester for swimming pool, above-ground pool, in-ground pool, inflatable pool, saltwater pool, chlorinated pool, spa, whirlpool.
Other design you need: solar and USB charging support (very handy for outdoor pool); floating design, floating in water; 2.4GHz WiFi connection support; easy to calibrate in app.