Reset FIBARO Smoke Detector

There is only one way to reset the FIBARO Smoke Detector. Resetting the FIBARO Smoke Detector erases the EPROM memory, including all information about the Z-Wave network and the main controller.

However, resetting the device will not delete the device from the Z-Wave main controller memory. Before resetting the device, it must be excluded from the Z-Wave network.

1. Press and hold button B for 3 seconds until the LED lights up white.

2. Release button B when a short beep sounds.

3. Wait until the LED lights up yellow signaling entry into the 4th menu.

4. Briefly press button B to confirm the choice.

5. A successful reset will be confirmed by the LED lighting up red. A short beep will sound at the same time.