Reset FIBARO Motion Sensor

Procedure for resetting the FIBARO Motion Sensor:

1) Make sure the battery is not discharged and properly in place in the case.

2) Press and hold button B for 4-6 seconds until the LED illuminates yellow signaling the 2nd option in MENU mode.

3) Release button B.

4) Briefly press button B again. Successful reset will be confirmed by the LED changing to red color before it turns off.

Notes:

  • There is only one way to reset the FIBARO Motion Detector. The procedure erases the detector's memory including data relating to the main controller and the Z-Wave network.
  • Resetting the device will not delete the device from the Z-Wave main controller memory.
  • Removing the device from the Z-Wave network will automatically reset FIBARO Motion Detector.

Related Products