Reset Roller Shutter 2

The reset procedure erases the module's EPROM memory, including all data information regarding the Z-Wave network controller, calibration, and power consumption.

1. Make sure the device is powered

2. Press and hold button B

3. Wait for the visual indicator to turn yellow (4th position of the MENU)

4. Release button B

5. Press button B again, briefly

6. After a few seconds, the device will reboot with auto-include mode enabled

7.To exit auto-inclusion mode, press the B key. Resetting the Micromodule for roller shutters will not cause it to be erased from the memory of the Z-Wave network controller. To add the device to the Z-Wave network again, you will need to exclude it first.

Related Products

FIBARO - Blind/Roller Shutter FGR-222 Z-Wave

• Out-of-Stock