Reset FIBARO Motion Sensor
Procedure for resetting the FIBARO Motion Sensor:
1) Make sure the battery is not discharged and properly in place in the case.
2) Press and hold button B for 4-6 seconds until the LED illuminates yellow signaling the 2nd option in MENU mode.
3) Release button B.
4) Briefly press button B again. Successful reset will be confirmed by the LED changing to red color before it turns off.
Notes:
- There is only one way to reset the FIBARO Motion Detector. The procedure erases the detector's memory including data relating to the main controller and the Z-Wave network.
- Resetting the device will not delete the device from the Z-Wave main controller memory.
- Removing the device from the Z-Wave network will automatically reset FIBARO Motion Detector.
Related Products
Does this answer your question?
Sorry about that
How can we improve it?
Thanks