I cannot manage to include my FIBARO RGBW Micromodule in my Z-Wave controller.
1. The FIBARO RGBW Micromodule is already included with another Z-Wave controller.
The FIBARO RGBW Micromodule needs to be reset.
2. The FIBARO RGBW Micromodule is too far from the Z-Wave controller.
The FIBARO RGBW Micromodule must be close to the Z-Wave controller during the inclusion process.
3. The FIBARO RGBW Micromodule is not powered.
The FIBARO RGBW Micromodule must be powered. Please check its power supply by:
a) checking the power supply,
b) checking the power supply of the FIBARO RGBW Micromodule.
NOTE: Remember that all electrical work should be done by a qualified electrician.
4. The FIBARO RGBW Micromodule has a different frequency (EU, US, or ANZ) than your Z-Wave controller.
The FIBARO RGBW Micromodule must operate on the same Z-Wave frequency (EU, US, or ANZ) as your Z-Wave controller. Please contact your dealer to exchange it.
5. The FIBARO RGBW Micromodule is broken.
Please contact your dealer to initiate the warranty procedure.