MCOHOME Z-Wave+ Touch Panel Switch 2 loads, white

The MH-S412-EU switch from MCOHome lets you switch the 2 connected loads, either manually like a conventional switch, or remotely via the Z-Wave wireless protocol. Its glass finish and design will give your home a modern look.

It can be included in the Z-Wave network and then operated by a Z-Wave controller or remote control. The switch can control any type of load, from lighting to electrical appliances.

The MH-S412-EU switch supports association commands (Group 1). Up to 5 other devices can be associated and controlled manually from the switch or Z-Wave controller.

The switch is also equipped with an LED to indicate its status.

Each Z-Wave module works like a wireless repeater with the other modules, to ensure total coverage of your home.

Please note that this switch requires neutral to operate. A flush-mounted box 50mm deep and 67mm in diameter is recommended for installation.

FUNCTIONS :

• Controls two lamps or devices remotely Can be
• installed in place of an existing switch
• ON / OFF function
• Supports association commands (Group 1 and Group 2)
• Controls two loads locally
• LED status
• Glass finish, modern design
• Touch buttons

TECHNICAL SPECIFICATIONS :

• Module type: Z-Wave receiver
• Color: White
• Power supply: 230 V, 50 Hz
• Wiring: 3-wire, neutral required
• Maximum power: 5A (1100W) for each channel
• Frequency: 868.42 Mhz
• Range: up to 30 m
• Dimensions: 86 x 86 x 43 mm
• Display: blue LED