TRIO2SYS Wireless roller shutter switch EnOcean 1 button

This switch transmitter is wireless, without batteries and therefore maintenance-free. Completely autonomous, it sends a radio signal thanks to the energy released when one of its keys is pressed.

The switch transmitters can be placed anywhere in the room and changed as desired. Its suitable support allows them to be fixed to a wall either by screws or by adhesive.

It is therefore particularly suitable for electrical installations without recessing, such as: renovations, modification of domestic installations or offices with movable walls.

Just press a button on the switch to remotely control various equipment via receivers. Before use, the switch must be associated with a receiver (see the receiver documentation for programming).

Associated with a receiver and a light detector, it allows you to remotely control various electrical equipment, including roller shutters.

This switch is delivered complete with its finishing plate from the Vimar PLANA range in white technopolymer. Several colors and models of finishing plate are also available.

FUNCTIONS:

• Wireless, battery-free switch
• EnOcean Technology
• Control one or more EnOcean receivers
• Add an order point
• Can be installed anywhere
• On/off and dimmer function
• Ideal for renovation
• ΛV marking for roller shutter
• Easy to install and use

TECHNICAL CHARACTERISTICS:

• Transmission frequency: 868.3MHz
• Transmitting power: 10mW max
• Dimensions: base 80x80mm x height 15mm
• Temperature: -25 to +65°C
• Switching cycles: > 50,000
• Certifications: CE and R&TEE directive 1999/5/EC
• Relative air humidity: 0% to 95%
• Scope in buildings:
  • Masonry: 20m, through 3 walls maximum
  • Reinforced concrete: 10m, through 1 wall/ceiling maximum
  • Placoplatre / Wood: 30m, through 5 walls maximum