JAMTRACK - Central unit for Jamming detection of wireless systems (433 and 868MHz)

WIRELESS ALARMS

BURGLARY OF HOUSES, OFFICES & SHOPS

The 433 and 868 MHz* frequency bands are reserved for wireless alarms by the public authorities. Wireless alarm systems use these frequency bands exclusively for communication (e.g.: Control unit <-> motion detectors).

Burglars use 433 or 868 MHz jammers to prevent communications and neutralize the alarm system. The majority of wireless alarm systems do not have 433 or 868Mhz interference detection systems. When they exist, they aremost of the time ineffective.

The JAMTRACK control unit analyses radio activity and in particular allows an external siren to be triggered if jamming is detected.

PREVENTION TOO…
The burglar uses a jammer before entering the crime scene to neutralize the alarm. The JAMTRACK control unit therefore detects the jamming and puts the burglar on the run before the break-in.

JAMTRACK is multibrand compatible:
SOMFY, DIAGRAL, VERISURE, CHACON, ADVISEN, PARADOX, OTIO, MYFOX, HONEYWELL, DAITEM, BLYSS, ATLANTICS, DELTADORE, VISONIC…

CARS

CAR THEFTS – PARKING

70% of car thefts are made using jammers, we talk about “Mouse Jacking”. The jammer neutralizes the vehicle’s wireless key: You think you have locked your vehicle and connected the alarm but in fact this is not the case!

The JAMTRACK control unit analyses the radio activity around the vehicle and allows an external siren to be activated if jamming is detected.

PREVENTION TOO…

The thief uses a jammer to prevent the vehicle from closing. JAMTRACK’s interference detection therefore occurs before any attempt to steal the vehicle.

JAMTRACK works for all car manufacturers: 
AUDI, RENAULT, VW, CITROEN, PEUGEOT, RANGE ROVER, PORSCHE, MAZERATI, BENTLEY, NISSAN, SMART, FIAT, OPEL…

SMART HOME

HOME AUTOMATION – IoT – REMOTE CONTROLS

Smart home and home automation are expanding and mainly use the 433 or 868 MHz frequency bands reserved for these uses by involving specific protocols such as zwave, enocean, x2D, x3D, RTS, Io-homecontrol….

The user of a jammer will prevent the proper functioning of your wireless installation: the garage or roller shutters will no longer close, the connected lock will no longer work…..

The JAMTRACK control unit analyzes radio activity and allows an external siren or a dedicated scenario to be activated if interference is detected.

JAMTRACK works for all Smart Home brands: 
SOMFY, DELTADORE, UBIWIZZ, ADVISEN, JEEDOM, FIBARO, VERA, EEDOMUS… 

and remote controlled shutters or garages:
SOMFY, VELUX, MARANTEC, DEPRAT, CAME, NICE…. 

PUBLIC & PROFESSIONAL PLACES

PARKING – AIRPORT STATION – SENSITIVE PLACES

The use of a jammer is always a prerequisite for an ongoing or future attempted break-in or malicious act.

The jammers are small in size and easily concealed. They are active over several hundred meters.

JAMTRACK contributes to improving the safety of public places (car parks, train stations, airports, smart buildings, etc.) or for sensitive professional premises (garages, jewellery stores, construction sites, etc.).

The activation of the siren or the integration of JAMTRACK technology into an existing monitoring system provides an alert.

INSTALLATION

LESS THAN 1 MIN

JAMTRACK connects directly to powered USB ports such as those of internet boxes, computers or home automation boxes… or via specific adapters for 220V or vehicle cigarette lighter. Its consumption is very low, 35mA.

As soon as it is plugged in, JAMTRACK is on. It’s plug&play !

JAMTRACK can also be integrated with the main brands of Smart Home solutions to allow you to create new alert scenarios (SMS, notifications…). Ask the brand of your Smart Home solution.

The 3.5mm jack on the side of JAMTRACK provides a 5V voltage to external devices such as a siren, flash…

FONCTIONS :

• Detects and prevents Jamming
• Applications fields : Wireless alarms, Cars, Smart Home, Public & professional places
• Easy to install, only 1 minute

CARACTERISTIQUES TECHNIQUES

• Power Supply : Via USB
• Frequency : 433Mhz & 868Mhz
• Type : Emitter / Receiver
• Connection : USB