EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-222 with buttons
search
  • EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-222 with buttons
  • EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-222 with buttons
  • EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-222 with buttons
  • EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-222 with buttons
  • EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-222 with buttons
  • EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-222 with buttons
  • EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-222 with buttons

EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-223 with buttons

EUT_R223
€43.20
Tax included

The euFIX R223 Adapter is used to install the Fibaro® Roller Shutter FGR-223 module on DIN TH35 type rail in the electrical switchboard.

Quantity

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

The euFIX R223 Adapter is used to install the Fibaro® Roller Shutter FGR-223 module on DIN TH35 type rail in the electrical switchboard.

The euFIX R223 Adapter consists of the case and the base board, where the FGR-223 module is mounted. The dimensions of the case are appropriate for a standard DIN TH35 type rail.

The base board contains a set of screw terminals, where all the wires (power supply, input and output signals, control push- buttons) can be safely connected.

The front panel of the case contains two diagnostics micro-push-buttons S1 & S2, which can be used to control the module, to register the module within the Z-Wave system or to remove it from the system without opening the adapter's case. 

FEATURES :

  • DIN adapter for Fibaro Roller Shutter FGR-223 with push-buttons
  • Used to install the Roller Shutter FGR-223 module on DIN TH35/TS35 type rail in the electrical switchboard
  • Free location on the label to locate the controlled line
  • Micro-push-buttons S1 & S2 used for control, inclusion or exclusion of the module within the Z-Wave system

TECHNICAL SPECIFICATIONS :

  • Supply voltage: 230 V AC +/-10%, 50–60Hz 
  • Load power: max 4,2A
  • Dimensions: 34.8 x 87.3 x 64.7 mm
  • Width in TE units: 2 TE modules
  • Conductor wires cross section: max. 2.5 mm2 
  • Maximum length of wires connected to Sx, S1, S2 inputs: 10m
  • Operating temperature: 0 °C to +50 °C
  • Relative humidity: ≤90 %, no condensation
  • Directives:
    • LVD 2014/35/EC
    • RoHS 2011/65/EU 



EUT_R223
7 Items

Data sheet

Type
Accessory
Accessory Type
Adapter

You might also like